Characterization of a fracture specimen for crack growth in epoxy due to thermal fatigue

Abstract

Finite element simulations are carried out to characterize a new fracture specimen, consisting of an outer circular epoxy ring bonded to an inner circular invar plate for accelerated thermal fatigue testing. Radial cracks are introduced in the epoxy ring. The growth of these radial cracks is correlated to the applied energy release rate G. We studied the dependence of G on the crack length, the specimen geometry and the elastic modulus. For short cracks, G is obtained in closed form. Analysis is carried out to determine the critical thermal buckling load the specimen can withstand. Experimental results show that the fatigue crack growth rate per thermal cycle d a/d N is given by d a/d N = 0.51(Δ G) 0.38 for cycling between 4 and 100 °C but by d a/d N = 0.25(Δ G) 0.24 for cycling between 20 and 85 °C, where Δ G is the difference of the energy release rate between the highest and lowest temperatures during a thermal cycle. More severe thermal cycles produce considerably larger fatigue crack growth rates than less severe ones at the same Δ G. This result also implies that isothermal fatigue tests will probably be inadequate to predict thermal fatigue crack growth in epoxies.