Abstract

The three-dimensional (3D) pore structures and permeability of shale are critical for forecasting gas production capacity and guiding pressure differential control in practical reservoir extraction. However, few investigations have analyzed the effects of microscopic organic matter (OM) morphology and 3D pore nanostructures on the stress sensitivity, which are precisely the most unique and controlling factors of reservoir quality in shales. In this study, ultra-high nanoscale-resolution imaging experiments, i.e. focused ion beam-scanning electron microscopy (FIB-SEMs), were conducted on two organic-rich shale samples from Longmaxi and Wufeng Formations in northern Guizhou Depression, China. Pore morphology, porosity of 3D pore nanostructures, pore size distribution, and connectivity of the six selected regions of interest (including clump-shaped OMs, interstitial OMs, framboidal pyrite, and microfractures) were qualitatively and quantitatively characterized. Pulse decay permeability (PDP) measurement was used to investigate the variation patterns of stress-dependent permeability and stress sensitivity of shales under different confining pressures and pore pressures, and the results were then used to calculate the Biot coefficients for the two shale formations. The results showed that the samples have high OM porosity and 85% of the OM pores have the radius of less than 40 nm. The OM morphology and pore structure characteristics of the Longmaxi and Wufeng Formations were distinctly different. In particular, the OM in the Wufeng Formation samples developed some OM pores with radius larger than 500 nm, which significantly improved the connectivity. The macroscopic permeability strongly depends on the permeability of OM pores. The stress sensitivity of permeability of Wufeng Formation was significantly lower than that of Longmaxi Formation, due to the differences in OM morphology and pore structures. The Biot coefficients of 0.729 and 0.697 were obtained for the Longmaxi and Wufeng Formations, respectively.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call