Abstract
In the present study, the authors emphasized on characterization, heat transfer and exergetic performance of nanofluid in plate heat exchanger (PHE) experimentally. The characterization of nanofluid incorporates the systematic measurement of thermophysical properties of nanofluids. The heat transfer performance incorporate the heat transfer rate, convective heat transfer coefficient, pumping power, exergy loss and exergetic efficiency of nanofluids. In this work, two types of nanofluids namely CeO2/water and ZnO/water are employed. The experimental outcomes are compared with water and between nanofluids. The experimental results revealed the best heat transfer performance is shown by ZnO/water nanofluid. The volume concentration of the nanofluids varied from 0.5 - 2.0%. Flow rate of coolant varied from 0.5.0-2.0 lpm at 2 lpm of hot fluid. The inlet temperatures of cold and hot fluid are 25° C and 50° C respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.