Characterization and Performance Evaluation of Modified Apatite Ore as a New Acid-Soluble Weighting Agent for Drilling Fluids

Abstract

Summary Drilling in oil and gas reservoir formations requires the solid weighting agent used in drilling fluids to have good acid solubility to facilitate plugging removal in subsequent operations. Limestone is the most commonly used acid-soluble weighting agent, but its low density and significant thickening effect lead to a low weighting limit. To achieve control of drilling fluid density, rheology, sag stability, and acid solubility, the feasibility of using apatite (AP) ore as an acid-soluble weighting agent for drilling fluids has been discussed after it was modified by the nitrogen-containing organic polybasic phosphonic acid sodium salt. The basic characteristics of AP and modified AP (MAP) were analyzed. After that, the rheological, filtration, and sag stability properties of MAP-weighted water-based drilling fluids with densities of 1.2 g/cm3 and 1.6 g/cm3 were evaluated, and acid solubility, filter-cake permeability, core permeability damage, and plugging removal tests by acid solutions were performed to evaluate the formation protection effect. The results show that the density of AP is 2.98 g/cm3, and the main component is hydroxyapatite. Its negative electricity and hydrophilicity were enhanced after surface modification, so its dispersion stability in water was enhanced, thereby improving the rheology, filtration, and sag stability properties of the MAP-weighted drilling fluid. The solubility of MAP in 10% HCl solution reached 90.13%, and the core contamination experiments show that after being soaked in HCl solution, the return permeability of contaminated cores reached higher than 90%, indicating that the MAP invading the core can be efficiently dissolved and removed in the acidic working fluids used in the subsequent completion and stimulation operations, thus effectively protecting the reservoir formation. The properties of MAP are superior to those of limestone, and it can be used as a new acid-soluble weighting agent for drilling fluids, considering both drilling fluid performance regulation and reservoir formation protection.