Abstract
ABSTRACTIn this study, we compared the quality of wood pellets obtained from several different raw materials, i.e., Rhododendron ponticum (Type 1), Laurus nobilis (Type 2), and Castanea sativa (Type 3). The quality of the wood pellets was characterized mainly by their bulk density, moisture content, ash content, volatiles, sulfur content in the ash, total sulfur content, heating values, elemental analysis of the ash, and chlorine content. The results showed that bulk density was similar for each type of pellet. In quality values, ash content and the sulfur content in the ash were found to be lower for Type 3 (Chestnut wood pellets) than they were for the other two types. The results also showed that dry samples of Type 1, Type 2, and Type 3 wood pellets had heating values of 5057, 4691, and 4571 kcal/kg, respectively, whereas the original (undried) samples had heating values of 4571, 4409, and 4293 kcal/kg, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
