Abstract
Abstract Utilizing highly concentrated solar power for thermochemical processing as one of the extraterrestrial in situ resource utilization (ISRU) applications has been highlighted as an essential technique to support deep-space exploration in the future. Multi-source high-flux solar simulators (HFSSs) are widely employed to provide stable irradiance for indoor solar thermal experiments. Meanwhile, numerical modeling that can characterize the radiation transport mechanisms within the solar thermal system has been developed for performance evaluation before field trials. However, significant differences between simulated and measured flux distributions were shown for existing models developed based on the Monte-Carlo ray-tracing (MCRT) method, which has been attributed to only one or two specific reasons. In this paper, we proposed a comprehensive analysis of the concentration characteristics of a 42 kW metal-halide lamp HFSS, developed at Swinburne University of Technology, considering the effect of five aspects. The flux distribution, uniformity, and vector distribution under different configurations were compared to quantify the influence of these factors on receiving irradiance. The suitable arc size, reflector shape, and reflector surface properties of the existing HFSS have also been numerically determined to improve the model and reduce the root mean square error (RMSE) for the lamp array from 38.2% to 8.3%. This research provides a potential pathway to numerically predict the radiation transfer performance of HFSSs and determine the suitable configuration for desired solar thermochemical applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.