Abstract

Adulteration investigation using rheological characteristics of DMF (Dairy milk fat) with melted beef fat at various temperatures been evaluated. The change in properties of steady shear and dynamic shear were measured range of 0.01 to 100% by varying strain of 0.1-100 radian per seconds respectively. Generally, DMF resembles the non-Newtonian fluid with flow behavior index (n) for shear thinning fluid of 0.224 to 0.911. The rate of shear ranged 0 to 100/s, dynamic viscosity values decreased DMF, 10%, 20%,30% and 100% adulterated beef fat from 39 to 0.309, 0.591 to 0.103, 0.331 to 0.251, and 0.115 to 0.0858 and -22.1 to -0.65 Pa.s at 36°C, respectively. Herschel–Buckley model optimized to detect the concentration of adulteration with the shear and stress values at R2 ≤ 0.995. The whole value of dynamic viscosity (η*) is more than value of steady viscosity (η) at the pure DMF and concentration of 10% adulteration.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.