Abstract

Sodium chloride (NaCl) is commonly used as a curing/preservative agent for raw hides and skins in tanneries and is removed through a soaking process with total dissolved solids (TDS) and other organic pollutants in effluent, causing significant pollution load to the environment. Hence, the present study evaluated to apply dried neem leaf powder (DNL) as an additive to reduce the usage of salt in skin processing and preservation. To make certain of DNL antimicrobial properties, solvent extracts were performed against proteolytic bacteria isolated from raw skins. Initial characterization of DNL revealed the presence of bioactive compounds nimbolide and dehydro salannol and acetone extract with 16.9-mm, 10-mm and 8-mm zone of inhibition against Salmonella sp., E. coli sp. and Bacillus sp. identified using phenotypic conventional biochemical screening method. Further, skin curing experiments were carried out using four different treatments of DNL (10% 15%, 20% and 25% w/w) along with 15% w/w of conventional salt to obtain an optimum concentration for pilot-scale studies. Thus, the application of optimal DNL (15%) and salt (15%) resulted in no physical changes such as smell and hair slip and was taken for further studies for hydroxyproline activity, pollution load and organoleptic properties along compared with control 40% salt. DNL-aided salt less preservation of freshly flayed goat skins at ambient condition showed no hair slip or putrefaction during the preservation period with significant reduction of TDS (86%) and chloride (71%) in soak liquors compared to conventional salt preservation and enhanced organic load requiring additional treatment. However, the application of the organoleptic, physical and hydrothermal properties of resulting leathers produced from the DNL applied skins was on par with results of leather obtained from conventional salt. Thus, our results demonstrate DNL-aided salt less preservation method is able to reduce the amount of salt for preservation of goat skins significantly, leading to reduced salinity issues during leather processing.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call