Abstract
The characteristic-value analysis of plastic dynamic buckling is presented for columns under the action of elastoplastic compression wave caused by an axial-step load. Two critical conditions constituting a dynamic instability criterion are derived on the basis of transformation and conservation of energy. The governing equations, the boundary conditions and the continuity conditions derived by the use of the first critical condition are the same as those given by the adjacent-equilibrium criterion and are insufficient for determining two characteristic parameters involved in the governing equations. A supplementary restraint equation for buckling deformations at the plastic-wave front and the elastic-wave front is derived by the use of the second critical condition. Then, a couple of characteristic equations for two characteristic parameters are derived on the condition that the governing equations have non-trivial solutions satisfying the boundary conditions, the continuity conditions and the supplementary restraint equation. The critical-load parameters, dynamic characteristic parameter (exponent parameter of inertia term) and dynamic buckling modes are calculated from the solutions of the characteristic equations.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.