Abstract

We demonstrated p-type conduction in MoS2 grown with phosphorous pentoxide via chemical vapor deposition (CVD). Monolayer MoS2 with a triangular shape and 15-µm grains was confirmed by atomic force microscopy. The difference between the Raman signals of the A1g and E12g modes for both the pristine and P-doped samples was 19.4 cm−1. In the X-ray photoelectron spectroscopy results, the main core level peaks of P-doped MoS2 downshifted by about 0.5 eV to a lower binding energy compared to the pristine material. Field-effect transistors (FETs) fabricated with the P-doped monolayer MoS2 showed p-type conduction with a field-effect mobility of 0.023 cm2/V⋅s and an on/off current ratio of 103, while FETs with the pristine MoS2 showed n-type behavior with a field-effect mobility of 29.7 cm2/V⋅s and an on/off current ratio of 105. The carriers in the FET channel were identified as holes with a concentration of 1.01 × 1011 cm−2 in P-doped MoS2, while the pristine material had an electron concentration of 6.47 × 1011 cm−2.

Highlights

  • Various studies have analyzed two-dimensional (2D) materials, such as graphene, MoS2, and WSe2, because of their critical properties and abundant potential for use in optical and electrical applications [1,2,3]

  • We report on the chemical vapor deposition (CVD) growth and characteristics of monolayer MoS2 with and without the addition of phosphorous pentoxide (P2O5) powder

  • The p-type conduction from monolayer MoS2 grown with P2O5 powder was confirmed and compared to pristine MoS2 with n-type behavior

Read more

Summary

Introduction

Various studies have analyzed two-dimensional (2D) materials, such as graphene, MoS2, and WSe2, because of their critical properties and abundant potential for use in optical and electrical applications [1,2,3]. There are Van der Waals (VdW) forces interacting in individual layers, which make exfoliation . These materials have a unique property; their band gap structure varies depending on the thickness. The liquid method still needs to be developed for applications, while the CVD method has been used to prepare ultrathin monolayers or few-layer MoS2 films over large areas [9]. Transistors have been fabricated via CVD growth of monolayer MoS2 These have been reported to exhibit good properties, including a high on/off current ratio and high mobility [10]. We report on the CVD growth and characteristics of monolayer MoS2 with and without the addition of phosphorous pentoxide (P2O5) powder. The p-type conduction from monolayer MoS2 grown with P2O5 powder was confirmed and compared to pristine MoS2 with n-type behavior

Experimental
Results
Conclusions
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call