Abstract
Microbial- or enzyme-induced calcium carbonate (CaCO3) precipitation (MICP and EICP) are relatively new ground improvement techniques. In this study, the mechanical behaviour of biotreated (MICP/EICP) and untreated sands was investigated in light of the critical state soil mechanics framework using a series of direct simple shear (DSS) tests. A wide range of calcium carbonate content (CC), initial void ratio after consolidation (e0) and effective initial normal stress ([Formula: see text]) was considered. The biotreated specimens showed improved shear strength and dilative tendency compared to untreated specimens with similar initial states. The ultimate state (US) for the biotreated sand shifted towards a smaller void ratio (e) than the value of e at the critical state of untreated sand at the same σ′N in e–log σ′N space. Compared to untreated sand, a significantly larger US stress ratio was achieved for the biotreated sand, particularly at high CC and low [Formula: see text]. The characteristic features of undrained behaviour, such as instability stress ratio, stress ratio at phase transformation and flow potential showed good relationships with modified initial state parameter, void ratio after biotreatment and CC. The bonding ratio, (τ/σ′N)bond, was used to quantify the interparticle bonding. The peak value of (τ/σ′N)bond for the biotreated sand was significantly larger than zero, particularly at high CC and low [Formula: see text], while the peak (τ/σ′N)bond for the untreated sand was negligible. It was also observed that the mobilisation and degradation of calcium carbonate bonds in biotreated sand during DSS shearing are influenced by both CC and [Formula: see text].
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.