Characteristics of hydrate formation, decomposition, and phase equilibrium in the transition area formed by the high-pressure jet breaking and sand filling method

Abstract

Marine hydrates mainly occur in clayey silt sediments, and their occurrence environment has the characteristics of a high clay content and low permeability, which seriously inhibit an increase in the gas production rate. This study presents a new method, the high-pressure jet breaking and sand filling method, to transform the natural gas hydrate (NGH) reservoir near the production well, whereby a water jet is used to form an area of sediment with large particle diameters and high permeability. Based on indoor experiments, we report the characteristics of hydrate formation, decomposition, and phase equilibrium in the transition area formed by this method under different sand particle sizes and mass fractions. The addition of sand at a high mass fraction with a large particle diameter significantly shortened the time required for rapid hydrate formation, prolonged slow hydrate formation, and reduced the increase in temperature. With an increase in the mass fraction of large-diameter sand, the free water content of pores increased, which made it easier to form hydrates with large particles, thus delaying the hydrate decomposition rate. The phase equilibrium curves of hydrates in clayey silt sediments with sand added at mass fractions of 30% and 50% were close to that of bulk hydrate in pure water at lower temperatures. As the temperature increased, the phase equilibrium curves gradually approached those of hydrates in clayey silt sediments.