Characteristics of forced flow past a square cylinder with steady suction at leading-edge corners

Abstract

We experimentally investigate the characteristics of a dynamic wake and of flow separation for a square cylinder with steady suction at its leading-edge corners. The wind tunnel experiments were conducted at a Reynolds number of 5946, and suction slots were manufactured symmetrically at the leading corners of the square cylinder. Steady suction was characterized with a suction momentum coefficient Cμ varying from 0.0227 to 0.3182. A time-resolved particle image velocimetry system was used to evaluate the control of leading-edge suction at different Cμ. Next, the measurements were analyzed by applying a proper orthogonal decomposition (POD) to study the control effectiveness. The POD results suggest that the first four modes of wake vortex shedding are transformed in controlled cases and that periodic Karman vortex shedding is suppressed. The results also show that, even with a very small momentum coefficient, the steady suction at the leading-edge corners stabilizes the cylinder wake. The wake region becomes longer and narrower in comparison with the baseline case. In addition, modifications of separation flow were visualized. At quite small Cμ, flow separation at the leading-edge corners is considerably suppressed. Upon increasing the suction momentum coefficient to 0.1364, flow separation at the leading edges is almost eliminated. Finally, we estimate the effect of drag reduction due to the leading-edge suction.