Abstract
In this paper, the TiFe-based master alloy Ti1.04Fe0.7Ni0.1Zr0.1Mn0.1Pr0.06 was fabricated by conventional induction melting with high purity helium as the protective gas. After that, the as-cast specimens were mechanically milled with nickel powders to synthesize the as-milled Ti1.04Fe0.7Ni0.1Zr0.1Mn0.1Pr0.06 + 10 wt.% Ni composites with excellent electrochemical characteristics. The master alloy is composed of TiFe, Ti2Fe and Pr phases, which has a typical crystal structure. Mechanically milling the master alloy with nickel powder leads to the reductions of the grain size and particle size, even forming amorphous structure. The experimental results showed that the specimens after ball-milling treatment can be used to hydriding and dehydriding by electrochemistry, getting the maximal discharge capacity in the first cycle, and no activation was required. The discharge capacity of the as-milled composites declined from 264.2 to 133.6 mAh/g with the milling duration extending from 5 to 30 h. The electrochemical kinetics markedly declined with prolonging milling duration. However, the electrochemical cycling stability of the specimens reduced firstly and then increased with the prolongation of grinding duration.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
