Characteristics of amine-based all-gas-phase iodine laser

Abstract

The characteristics of an amine-based all-gas-phase iodine laser (AGIL) are studied. At constant flow rates of the chemical species, the small-signal gain and laser output power are measured at three different positions in the flow reactor. It is clarified that the positive gain exceeding the threshold (2.3×10−3%/cm) is maintained over a region more than 80 mm long along the flow. The highest small-signal gain of 7.8×10−3%/cm and laser output power of 50 mW are observed at 170 mm downstream from the mixing point of HI and H. Numerical simulations suggest that the long positive-gain region is attributable to the following characteristics of the present apparatus: inefficient mixing and inefficient H2 dissociation. It is confirmed experimentally and numerically that these limitations are beneficial for extending the positive-gain region to the downstream; however, the optimum HI flow rate is limited a small value and results in a much lower gain than the theoretical limit. In order to achieve a higher gain, fast mixing and efficient H2 dissociation must be simultaneously achieved so as to increase the optimum HI flow rate. Numerical simulation results suggest that a positive gain of 5.4×10−2%/cm, a 7-times higher gain than that indicated by the present experimental results, should be obtained with the same NCl3 flow rate.