Abstract
Electrical energy has become a basic need of modern society, but the supply of electricity has not yet fully met the needs of the community. Many potential energy sources can be converted into electrical energy. One potential of energy sources is water flow which can be used for micro-hydro power plants in remote areas. This study aims to analyze the characteristics of the Archimedes screw turbine of micro-hydro power plant, in particular concerning on variations in the elevation angle of the turbine. Characteristics determination was carried out on a prototype of a micro-hydro power plant using a Brush Less Direct Current (BLDC) generator and two blades of Archimedes screw turbine. The varied turbine elevation-angle was applied, namely 20, 25, 30, 35, and 40 o , with a water discharge of 2.64 L/s. The results show that an increase in the turbine elevation angle from 20 to 40 o causes an enhancement in mechanical characteristics, i.e. torque and rpm, as well as electrical characteristics, i.e. voltage, current, and electric power. The mechanical and electrical characteristics reach a maximum value at the elevation angle of about 30 o , which is 27.87 mW at 1 kΩ load. Furthermore, increasing the elevation angle to become more than 30 o causes a decrease in mechanical and electrical characteristics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
