Abstract
TiN and TiAlN/TiN PVD coatings deposited onto as-ground surfaces have been characterised via direct cross-sectional imaging and transmission electron microscopy with the aid of a focused ion beam system. Cross-sections showed that the coatings exhibit consistent coverage, even in sheltered areas such as at the base of grooves resulting from prior grinding. A columnar grain structure was observed in all coatings. A number of defects were observed such as seams and voids resulting from coating onto the as-ground surface and macroparticles which were shown to be deposited during the metal ion etching stage. Cross-sections through nanoindents revealed that the coatings deform by through-thickness shear cracking.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.