Characterisation of kapok fibre's biochar for arsenate adsorption removal from aqueous solution.

Abstract

Al-KBC was produced through the simple pyrolysis of Al-modified kapok fibres at high temperatures. Using the N2 adsorption Brunauer Emmett Teller (BET) process, Fourier transforms infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), the energy-dispersive X-ray spectroscopy (EDS) spectroscopy, and X-ray photoelectron spectroscopy (XPS), the sorbent changes and characteristics were analysed. As a result of Al's addition to the fibre's surface, Al-KBC exhibited superior As(V) adsorption performance compared to KBC due to better pore structures. Experiments on the kinetics of As(V) adsorption revealed that the adsorption followed the pseudo-second-order model and that intradiffusion was not the only factor governing the adsorption. Experiments with isotherms indicated that the adsorption mechanism corresponded to the Langmuir model, and the adsorption capacity Qm of Al-KBC at 25 °C was 483 μg/g. The thermodynamic experiments suggested that the adsorption reactions were spontaneous endothermic with a random approach at the adsorption interface. 25 mg/L of coexisting ions such as sulphate and phosphate reduced the sorbent As(V) removal ability to 65% and 39%. After seven cycles of adsorption/desorption, Al-KBC demonstrated satisfactory performance in terms of reusability, adsorbing 53% of 100 μg/L As(V) from the water. This novel BC can probably be used as a filter to purify groundwater with high As(V) concentration in the rural zone.