Abstract
AbstractObservations of a regular pulse burst (RPB) at the end of a K‐event are analyzed utilizing a simple geometric model and particle swarm optimization (PSO) to estimate the currents and propagation speeds of successive pulses of the RPB. The results show that the current of successive pulses is strongly overlapped and, for typical speeds of continuously propagating K‐events, are unphysically large (88 kA), exceeding the currents of most strokes to ground. By default, the unphysical nature of the result, coupled with very high frequency interferometer observations of an RPB in Florida, shows that the propagation speed of the pulses is significantly faster than expected, namely ∼0.6–1.8 × 108 m/s. This reduces the inferred current from 88 kA down to 6–18 kA, typical of intracloud events. The fast propagation speed of the stepping is explained by successive pulses retracing much of the path of the preceding pulses due to the successive pulses being strongly overlapped.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.