Abstract
In this paper, Old Corrugated Container (OCC) was used as the raw material for making paper. The layer-by-layer (LBL) assembly process of creating highly structured thin films was adopted to modify the surface of OCC fibres. Poly dimethyldiallylammonium chloride (PDADMAC) and hydroxyethyl cellulose (HEC) have been used to build up polyelectrolyte multilayers on OCC fibres under a certain condition. Zeta potential analyzer was used to monitor the dynamic adsorption of PDADMAC and HEC with different amount on OCC fibers. Strength measurements of the sheets including tensile index and bursting index were also determined, showing a significant improvement in physical strength with the increase of adsorbed layer number. Compared with not being processed sheets, tensile index and bursting index of sheets from treated fibre with polyelectrolyte multilayers were raised by 36.65% and 49.50%, respectively. Furthermore, filtration time analysis of OCC fibre suspension showed that the built up of PDADMAC and HEC on OCC fibres could improve the fiber-fiber joint strength of joints from polymer-treated fibers, which made the filtration time decline from 30 s to 10.6 s. In addition, SEM was introduced to observe the morphology of the PDADMAC/HEC multilayers. The images revealed that the surface of OCC fibres structured a film like plastic, which could be ascribed to the adsorption layer of polyelectrolyte.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.