Change of dental color and temperature through two bleaching agents boosted with light emitted by diodes.

Abstract

The use of light sources during the application of bleaching can reduce the time and improve the results, but at the same time this can increase the dental temperature. The objective of this study was to evaluate the performance of two bleaching agents and the increase in dental temperature with the use of light emitted by diodes (LED)-unit. Forty third molars were obtained and randomized: the whiteness without lamp (WHN) and Pola office without lamp (PON) groups, two bleaching systems based on 35% hydrogen peroxide were used, according to manufacturer specifications. For the whiteness with lamp (WHL) and Pola office with lamp (POL) groups the same bleaching agents were light boosted. A spectrophotometer and ∆WID equation was used to record and analyzed teeth color. An infrared thermometer was used to record the external and internal temperature. A ∆T was obtained by the difference of the temperature of the groups with and without LED (WHN-WHL and PON-POL). For statistical analysis Kruskal-Wallis test and Anova test were performed. The WHN, PON, WHL, and POL groups reported ∆WID values of 4.88 ± 1.08, 9.26 ± 3.27, 5.70 ± 2.48, 12.08 ± 5.44, respectively. The dates of internal temperature were 1.01 and 1.07°C, and for external temperature were 1.61 and 1.15°C respectively. With the limitations of this study, both bleaching agents reported a significant increase in ∆WID with and without association of light. Significant temperature increases were also observed. The highest average temperature increase was approximately 1.61°C. Bleaching agents boosted with LED may improve the results of bleaching, but it is not essential to obtain good results.