CHANGE IN STRENGTH PARAMETERS OF DISPERSED SOILS AFTER HIGH-FREQUENCY VIBRATION

Abstract

The use of the technology of high-frequency sheet piles driving or extraction in conditions of weak, structurally unstable soils inevitably leads to a change in the structure of the soil. This is especially true for buildings which fall into the zone of influence. Often, foundation for historical buildings is water-saturated sands, spread by fluid and fluid-plastic clay soils. In the process of external dynamic action, the soil foundation is been destructing, so their strength and deformation parameters are reduced. In this case, the result of vibration effects on a dispersed water-saturated sample can be both compaction for sandy soil and decompaction of clay soils. These changes lead to additional deformations of buildings and structures of the surrounding area. Therefore, the issue of assessing the limits of applicability of vibration technology in certain conditions is relevant. The object of the study is the changes in the properties of clay soils of various consistencies after exposure to vibration. The results of laboratory studies to determine the strength parameters of dispersed soils after high-frequency vibration are presented. The results of field measurements by CPT "before", "after" vibration immersion and vibration extraction of sheet piles are considered. Comparison of the results of field and laboratory studies is carried out to identify patterns of change in the strength characteristics of weak soils under the influence of vibration loads. A tendency towards a decrease in the strength parameters of dispersed soils is shown. Currently, due to the insufficient number of laboratory and field studies to study the effect of high-frequency vibration on the change in the strength parameters of weak water-saturated clay soils, it is not possible to identify a clear dependence of the change in parameters on the time and frequency of vibration.