Abstract
The microstructures and mechanical properties of Ti-35Nb-2Ta-3Zr alloy, which was fabricated by vacuum consumable arc melting furnace followed by hot pressing, subjected to cross-rolling were investigated in this study. Shear slip and stress-induced α″ martensite phase transformation play an important role in the plastic deformation. Hundred nanometers-sized grains are obtained, when the alloy is cross-rolled at a reduction ratio of 99%. The cross-rolled alloy exhibits considerable low Young’s modulus (around 48 GPa) and high ultimate tensile strength (around 880 MPa) accompanying with ductile fracture. For Ti-35Nb-2Ta-3Zr alloy cross-rolled at a reduction ratio of 60%, excellent isotropy of mechanical properties along different directions of specimens are obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.