Abstract
Cyclic zero-tension tests for symmetric angle-ply CFRP laminated specimens were carried out to investigate the low cycle fatigue behavior of graphite/epoxy and graphite/PEEK composites. Two types of stacking sequences were tested: [+θ/-θ]4s (Distributed ply) and [+θ4/-θ4]s (Blocked ply), where θ was 30º or 45º. Stress-strain curves of specimens under cyclic loadings were obtained by means of an extensometer. A mechanical ratcheting, which means progressive increase in plastic strain at each cycle, was observed on the cyclic stress-strain curves. Comparing the stress-strain curve of static tensile test with one of the cyclic zero-tension test, we made the assumption that the fatigue failure occurred when the ratcheting strain by cyclic loadings reached the static failure strain. Results of an ultrasonic scanning test revealed that the distributed ply specimens differed from the blocked ply specimens in an internal fatigue damage progress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.