CFD-Tool for Assessment of the Reactor Pressure Vessel Integrity in Pressure Thermal Shock Conditions: Influence of Turbulence Model and Mesh Refinement on the Vessel Thermal Loading During PTS Transient

Abstract

Integrity evaluation methods for nuclear Reactor Pressure Vessels (RPVs) under Pressurised Thermal Shock (PTS) loading are applied by French Utility. They are based on the analysis of the behavior of relatively shallow cracks under loading PTS conditions due to the emergency cooling during SBLOCA (Small Break Loss of Coolant Accident) transients. This paper presents the Research and Development program started at E.D.F on the Computational Fluid Dynamic (CFD) determination of the cooling phenomena of a PWR vessel during a Pressurised Thermal Shock. The numerical results are obtained with the thermal-hydraulic tool Code_Saturne, in combination with the thermal-solid code SYRTHES to take into account the coupled effect of heat transfer between the fluid flow and the vessel. Based on the global and local Thermal-hydraulic analysis of a Small Break Loss of Coolant Accident transient, the paper presents mainly a parametric study which helps to understand the main phenomena that can lead to better estimating the margin factors. The geometry studied represents a third of a PWR pressure vessel and the configuration investigated is related to the injection of cold water in the vessel during a SBLOCA transient. Conservative initial and boundary conditions for the CFD calculation are derived from the global Thermal-hydraulic analysis. Both the fluid behavior and its impact on the solid part formed by cladding and base metal are considered. The main purpose of the numerical thermal-hydraulic studies is to accurately estimate the distribution of fluid temperature in the down comer and the heat transfer coefficients on the inner RPV surface for a fracture mechanics computation which will subsequently assess the associated RPV safety margin factors.