Abstract
Kenics static mixers (KSM) are extensively used in industrial mixing–reaction processes by virtue of high mixing efficiency, low power homogenization and easy continuous production. Resolving liquid droplet size and its distribution and thus revealing the dispersion characteristics are of great significance for structural optimization and process intensification in the KSM. In this work, a computational fluid dynamics–population balance model (CFD–PBM) coupled method is employed to systematically investigate the effects of operating conditions and structural parameters of KSM on droplet size and its distribution, to further reveal the liquid–liquid dispersion characteristics. Results indicate that higher Reynolds numbers or higher dispersed phase volume fractions increase energy dissipation, reducing Sauter mean diameter (SMD) of dispersed phase droplets and with a shift in droplet size distribution (DSD) towards smaller size. Smaller aspect ratios, greater blade twist and assembly angles amplify shear rate, leading to smaller droplet size and a narrower DSD in the smaller range. The degree of impact exerted by the aspect ratio is notably greater. Notably, mixing elements with different spin enhance shear and stretching efficiency. Compared to the same spin, SMD becomes 3.7–5.8 times smaller in the smaller size range with a significantly narrower distribution. Taking into account the pressure drop and efficiency in a comprehensive manner, optimized structural parameters for the mixing element encompass an aspect ratio of 1–1.5, a blade twist angle of 180°, an assembly angle of 90°, and interlaced assembly of adjacent elements with different spin. This work provides vital theoretical underpinning and future reference for enhancing KSM performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.