CFD studies of the effect of holes and angles of upstream duct of horizontal axis wind turbines

Abstract

This work presents an approach to the analysis of duct-augmented wind turbines using Computational Fluid Dynamics (CFD). The main objective is to find the optimum duct shape and design that gives maximum boost to the performance of wind turbines. A duct surrounding the rotor is able to increase the power coefficient above the Betz limit, so it has attracted great attention for many years. In this work, an extensive analysis of the performance of duct augmented wind turbines is presented, considering the influence of various duct angles and axial holes in the diffuser on the efficiency, in which a new formulation for the far-wake velocity is proposed. This study consists of two main parts. The first part compares the experimental performance of a conventional wind turbine with the identical turbine modeled and solved using CFD. Once the CFD results are validated, the second part presents an extensive parametric study by integrating a convergent duct with different parametric designs into the wind turbine model. The study reveals that the CFD results are in close agreement with the experimental results. It is found that the presence of holes in the duct has a detrimental effect on performance. However, the increase in the angle of the duct enhanced the performance, and there was an average increase in power output by 96% with a duct angle of 20°.