Abstract
The present study is focused on CFD simulation of constrained melting of Phase Change Materials (PCMs) in a spherical container. To investigate the melting process of the PCM, its melting fraction was analyzed at different times. The results indicated the existence of thermally stable layers on the top of the sphere. Moreover, inspection of the calculated temperatures at different points along the vertical axis indicates the existence of some disturbances at the bottom of the sphere due to the natural convection. After the validation of the results, the effects of different parameters such as the surface temperature of the capsule, the initial temperature and the size of the spherical capsules, on the melting process were investigated. The initial temperature did not affect the melting rate, whereas melting rate increased by increasing the surface temperature of the capsule and also decreasing the diameter of the sphere. The results showed that the surface temperature of capsule compared to geometrical parameters and other operational conditions can have a greater influence on the melting rate and the heat flux.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
