Abstract
ABSTRACT Few studies on the heat transfer of calcium carbide (CA) under natural convection exist currently. Studying the radiative heat transfer of CA is of significant importance for its waste heat utilization. Therefore, this paper, based on CFD simulations, investigates the heat transfer processes of CA under natural convection and radiative heat transfer. Additionally, on-site experiments are conducted to measure the temperature of CA. The results indicate that considering radiation, the maximum discrepancy between simulation and experimentation is 11.9%, while without considering radiation, the maximum discrepancy increases to 85%. Based on the temperature variations on the surface of CA and changes in cooling rates, it is inferred that waste heat recovery should occur within the first three hours after the CA is taken out of the furnace. Within the initial six hours, the convective and radiative heat transfer amounts are 17.1 kW•h and 155.67 kW•h, respectively, with the latter constituting 90.11% of the total heat exchange. Therefore, adopting a radiation-based approach is recommended for the recovery of waste heat from CA. Finally, employing data regression analysis, a functional relationship between the natural convection-radiation coupled heat transfer coefficient and time is derived.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
