Abstract
ABSTRACTAt high temperature, ethylene dichloride decomposes into vinyl chloride monomer and HCl by a complex reaction mechanism. Due to chemical reaction type and heat transfer mechanism, design and simulation of cracking reactors are complicated. This process is very important from either chemical reaction or transport phenomena’s point of view. In this study, 2D simulation of cracking reactor is performed with FLUENT software. Simulation results were compared with the experimental data. Then, we investigate the simulation results and effect of various parameters on the process. Results show that with process progress and temperature increase during reactor length, conversion and coke formation amount are increased. At the end of the process, conversion is 52.69 that has good agreement with industrial data. Addition of promoter to the process fluid and fluid behavior in different coil outlet temperatures was studied; finally, the effects of these factors are described in detail.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
