Cerium-tungsten oxides supported on activated red mud for the selective catalytic reduction of NOx

Abstract

Activated red mud (RM) has been proved to be a promising base material for the selective catalysis reduction (SCR) of NOx. The inherent low reducibility and acidity limited its low–temperature activity. In this work, molybdenum oxide, tungsten oxide, and cerium oxide were used to reconfigure the redox sites and acid sites of red mud based catalyst. When activated red mud was reconfigured by cerium-tungsten oxide (Ce–W@RM), the NOx conversion kept above 90% at 219–480 °C. The existence of Ce3+/Ce4+ redox electron pairs provided more surface adsorbed oxygen (Oα) and served as a redox cycle. Positive interactions between Ce, W species and Fe oxide in red mud occurred, which led to the formation of unsaturated chemical bond and promoted the activation of adsorbed NH3 species. WO3 and Ce2(WO4)3 (formed by solid–state reaction between Ce and W species) could provide more Brønsted acid sites (W–O modes of WO3, WO or W–O–W modes of Ce2(WO4)3). CeO2 species could provide more Lewis acid sites. The Langmuir–Hinshelwood (L-H) routes and Eley-Rideal (E-R) routes occurred in the low-temperature SCR reaction on the Ce–W@RM surface. NH4+ species on Brønsted acid sites, NH3 species on Lewis acid sites, bidentate nitrate and bridging nitrate species were key active intermediates species.