Ceramic metal oxide coatings formation by hybrid plasma electrolytic treatment: Interaction scenarios of ceramic NPs with oxide layers

Abstract

Understanding the formation of protective ceramic metal oxide (CMO) coatings (layers) on the surface of light alloys remains a pressing task in light of products operating in extreme conditions. Plasma electrolytic oxidation (PEO) of light alloy surfaces has recently been modified by introducing various ceramic nanoparticles (NPs) into the electrolyte to perform hybrid plasma electrolytic treatment (HPET). In this work, the general and distinctive features of the interaction mechanisms of TiC, SiO2 and ZrO2 nanoparticles (NPs) with the CMO coating formed by HPET of Al–Si and Mg-based alloys were summarized and theoretically substantiated. The interaction of charged ceramic NPs accelerated by an electric field with the oxide layer is determined by transformation of the NPs kinetic energy into heating and plastic deformation, into phase transformations, as well as into the creation of new surface defects. One of the controlling factors is the ratio of the particle and the oxide layer hardnesses. In the case of SiO2 in Al–Si alloys, the formed coating is harder than the ceramic NPs while in other cases, the NPs are harder than the CMO coating, which determines the different scenarios for the interaction of NPs with the coating under HPET. In summary 7 different scenarios for the interaction of ceramic NPs added to the electrolyte with the СМO layer during its formation put forward, which depending on the ratio of the hardness of the CMO layer and the added particles, temperature/pressure conditions of the phase transformations in the NP (including its melting), the particles size distribution and the base PEO process parameters.