Abstract
Ceramic heat pipes and heat pipe based heat exchangers are tailored for automatically heat removal and heat distribution in thermally, chemically and abrasive high stressed systems. The manufacture of silicon carbide heat pipes was carried out. These were filled with sodium or zinc and sealed by laser brazing using metallic and glassy solder materials. High-temperature performance tests revealed a stable operating regime for both ceramic heat pipes with sodium and zinc as working fluid, respectively. Specifically the heat transferred by a zinc filled heat pipe of 22 mm in diameter and 750 mm in length accounted for 600 W at a temperature difference of 400 K. Notably the internal heat transfer capacity of the working fluid was even higher however, the total heat transfer was limited by the external active heat transfer area of the heat pipe. In order to evaluate the long-term stability of the heat pipes, particularly with respect to the joining seam, manufactured heat pipes are currently being tested in long-term annealing experiments at a temperature of 1000 °C under a variety of corrosive atmospheres.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.