Abstract
AbstractThis work focused on obtaining low-cost macroporous ceramic tubes to be used as filters or as supports for the preparation of multilayer ceramic membranes. A Tunisian natural clay was used as raw material and cellulose as porogen agent. Cellulose fibers obtained from paper were used. The tubular supports were shape formed by extrusion in order to obtain a low-cost material with high porosity low shrinkage. The characterization of the process has been carried out studying the phase evolution, microstructure, pore structure, mechanical strength, and water permeability at various sintering temperatures. The porosity was improved adding 10 wt.% of cellulose to the clay and sintering temperatures were between 800 and 900°C. The sintered macroporous support with 10 wt.% cellulose, sintered at 850°C exhibited good performance such as porosity 40%, mechanical strength 6.5 MPa, and water permeability 8.5 L/h m3. Finally, an emulsion of oil was significantly cleaned. A rejection rate of 50% for 10 min of tr...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
