Abstract
Abstract In the current energy scenario, it is necessary to reduce fossil fuel consumption to achieve the far-sighted and stringent decarbonization goals. To date, heat is mainly produced through fossil fuels. Alternatively, electrically driven heat pumps can exploit renewable power to recover environmental and waste heat, offering energy efficient and environmentally friendly heating and cooling for applications ranging from domestic and commercial buildings to process industries. For this reason, they are expected to play a primary role in complementing or displacing natural gas boilers in the residential and industrial sectors in the near future. Centrifugal compressors are already used as prime movers of the working fluid in heat pumps, thanks to their industrial replicability, compact size, affordable costs, and good performance in terms of efficiency and low noise. However, they are subject to instabilities such as surge and stall like any other dynamic compressor and these phenomena develop quite differently than in classic open-loop systems such as gas turbines. In fact, such peculiarity is mainly due to the closed-loop configuration with real gases in two-phase conditions, occurring in typical heat pump cycles. In addition, heat exchangers also contribute to make these phenomena different from what is commonly studied. Compressor surge in closed-loop heat pump systems has received lower attention than other applications by the engineering community, lacking dedicated experimental characterization, and clear exposition of the phenomenon. The aim of this paper is to experimentally investigate the behavior of a centrifugal compressor installed into an innovative close loop heat pump system under stable and unstable conditions from both vibrational and fluid-dynamic points of view. The impact of the main process parameters on the evolution of the instability is shown, highlighting how surge cycles change by varying system operating conditions. The energy contents of surge cycles and pressure fluctuations are highlighted, using data postprocessing techniques such as fast Fourier transform and phase locked average. The vibro-acoustic analysis enrich the comprehension of the phenomena. The experimental results shown in this paper can be a basis for the future development of validated mathematical models of closed-loop heat pumps systems equipped with dynamic compressors operating under stable and unstable operating conditions.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
