Abstract
The near infrared continuous-wave cavity ring-down spectroscopy (CW-CRDS) technique is used to determine the isotope ratio of atmospheric methane. A narrow linewidth distributed feedback (DFB) diode laser was used to achieve high sensitivity detection with a high finesse cavity [1]. By changing temperature and current of the DFB diode laser, the output wavelength was tuned across the absorption line peaks of 12CH4 and 13CH 4 around 6046.954 cm−1 and 6049.121 cm−1, respectively. The isotope ratio of atmospheric CH4 (−45.7±1.4) %o was obtained. We achieved CH4 absorption spectra with peak signal-to-noise ratios as high as 470:1. The current system has a detection limit of 8.4×10−11 cm−1. For performing concentration measurements the sample gas was admitted to vacuum chamber. To detect a trace gas concentration, it is necessary to increase light and gas interaction time as much as possible [2]. Therefore, we used 172 cm long chamber and were able to achieve a decay time of 460 μs and a path length of 138 km. Experiments were conducted at different pressures. The experimentally measured CH4 absorbance spectra plotted versus wavenumber show a very good agreement with calculations from HITRAN database [3]. The results are presented in Fig. 1.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
