Cationic polymer chain tethered on the pore-wall of 3-D ordered macroporous resin for the removal of hexavalent chromium from aqueous solution

Abstract

A novel 3-D ordered macroporous (3DOM) adsorbent with a cationic polymer chain (poly(N,N-dimethylaminoethyl methacrylate), PDMAEMA) tethered on the pore wall was prepared by surface-initiated atom transfer radical polymerization (SI-ATRP) for the removal of toxic Cr(VI) ions from aqueous solution. In comparison with recently reported adsorbents, the adsorbent remarkably stands out owing to large adsorption capacity, relatively fast kinetics, and high stability in the regeneration process. The adsorption capacity significantly depended on the solution pH and there was a wide working pH range that is much convenient in practical application. Kinetics of Cr(VI) adsorption by the 3DOM adsorbent was studied in batch experiments, in the temperature range 298–318K. The equilibriums were arrived within 120–130min and a pseudo-second order model can be described well. In the adsorption isotherm study, experimental data followed the Langmuir adsorption model. The maximum adsorption capacity increased with the increase of temperature, and reached the high value of 431.0mg/g at 308K. Thermodynamic parameters revealed spontaneous and endothermic adsorption processes. Furthermore, the 3DOM adsorbent remained high adsorption capacity (above 90% of the original Cr(VI) loading capacity) after 15 adsorption–desorption cycles by simply using sodium hydroxide solution as the desorption liquid, which ensured the reusability of 3DOM adsorbent.