Abstract
CoFe2O4, CoBi0.1Fe1.9O4, CoLa0.1Fe1.9O4, and CoAl0.1Fe1.9O4 nanoparticles were successfully synthesized by the coprecipitation method. After annealing at 700 °C for 5 h, the x-ray Diffractometer results confirm that a single phase of cobalt ferrite-based nanoparticles is obtained, which is suitable for ICDD 22-1086. The addition of Bi3+, La3+ and Al3+ ions to the cobalt ferrite nanoparticles modified the crystallite size and lattice constant. Trivalent metal cation substitution tunes the crystallite size which has also been confirmed by measuring the grains with Scanning Electron Microscope images. In the Far Transform Infra-Red curve, the addition of metal ions (Bi3+, La3+, and Al3+) to cobalt ferrite nanoparticles resulted in absorption peaks at the tetrahedral and octahedral sites without any additional absorption peaks. The VSM results showed that saturation magnetization decreased drastically in the presence of trivalent non-magnetic cations, which confirms the replacement of Fe3+ by trivalent non-magnetic cations. The kOe order of the coercive field was obtained in this experiment. The largest coercive field of the cobalt ferrite nanoparticles was obtained with the addition of La3+ ions, i.e. 3.67 kOe suggest to support both Jahn-Teller effect and strain-induced magnetism.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.