Abstract
The main goal of our study is to prepare and to understand the properties of cubic SiC nanowires (NWs) and to characterize its native silicon dioxide. The wires, with diameters ranging from 10 nm to 2 μm, have been prepared by a CVD process on Si (0 0 1) substrates, using CO as the carbon source and Ni as the catalyst. A structural and optical analysis, by means of TEM, micro-Raman and cathodoluminescence (CL) spectroscopy, has been performed. Two sets of samples have been studied, labelled A and B, which differ for growth process conditions. Set A showed two broad CL peaks. Set B showed a much weaker CL emission. This difference has been explained by means of TEM investigation and micro-Raman spectra: set A shows a thick amorphous silicon dioxide layer on the wire surface, whereas set B shows a thin or absent oxide layer. Consequently, the nature of the CL emission has to be ascribed mainly to oxide-related recombination.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.