Abstract
AbstractMesoporous Co3O4/N‐PC in powder form was synthesized via a wet‐chemical approach, and the resulting material was deposited onto nickel foam as a substrate without the use of a binder. Prior to device fabrication, a thorough analysis of suitable and cost‐effective aqueous alkaline and neutral electrolytes was conducted. Electrolyte optimization was performed using Co3O4/N‐PC/NF electrode with Na2SO4, NaOH, LiOH, and KOH electrolytes. The supercapacitor performance of the binder‐free deposited materials was found to be superior in KOH electrolyte compared to other aqueous electrolytes at equal concentrations. Further optimization of the KOH electrolyte concentration was carried out to achieve the best electrochemical performance for the Co3O4/N‐PC/NF electrode. Electrochemical results demonstrated that the Co3O4/N‐PC/NF electrode performed well in 1 M KOH electrolyte, surpassing its performance at other concentrations. Subsequently, a solid‐state asymmetric device was fabricated, utilizing Co3O4/N‐PC, activated carbon, and a KOH+PVA gel as the cathode, anode, and electrolyte, respectively. The assembled asymmetric Co3O4/N‐PC/NF‐AC/NF device exhibited an energy density of 12.08 Wh kg−1 and a power density of 2500 W kg−1 within a potential window of 1.5 V. Impressively, after nearly 3000 continuous GCD cycles, the device showed negligible initial specific capacitance decay. The device was also successfully tested for powering the LED.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.