Abstract
Catalytic performances of Silica Pillared Clay (SPC) supports synthesized in different silica amounts both from standard SWy-2 clay mineral and Hançılı region bentonite rock (HWB), and iron (Fe) and/or titanium (Ti) incorporated SPCs in different combinations were evaluated in various advanced Catalytic Wet Peroxide Oxidation (CWPO) of phenol. Host clay mineral type led to different oxidation performances and metal loading created significant increases in the catalytic performance. CWPO performance of Fe-loaded SPCs was better than Ti-loaded ones, so oxidation parameters for Fe–SPCs were studied in detail. Catalyst amount and rise in temperature increased phenol conversion values significantly, and catalysts were more effective in lower pH reaction medium. Aromatic intermediates such as catechol, hydroquinone and benzoquinone formed at the beginning of oxidation were oxidized to carboxylic acids with an advancing oxidation time. The presence of carboxylic acids such as oxalic and formic acid resulted in relatively low total organic carbon (TOC) conversion values. The highest catalytic activity was obtained with high silica content Fe–SPCs synthesized with both host clays. Complete conversion was nearly achieved within 60 min with an experimental condition of T = 30 °C, pH = 3.7 and catalyst/solution ratio = 2 g/L for SWy-2 based catalyst by applying either CWPO or PCWPO (Photo Catalytic Wet Peroxide Oxidation) techniques. SCWPO (Sono Catalytic Wet Peroxide Oxidation) technique also yielded this value at the same oxidation conditions for HWB based catalyst. TOC conversion values at 240 min oxidation time were determined as 33% and 48% for SWy-2 based catalyst with CWPO and PCWPO techniques, respectively, and 37% for HWB based catalyst with SCWPO technique. SWy-2 based catalyst still retained its performance after 3 cycles.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.