Catalytic valorization of Kraft lignin into feedstock chemicals with methyltrioxorhenium (MTO) catalyst in microbial electrochemical cell

Abstract

In this study, the authors investigate a novel approach to valorize Kraft lignin using the catalyst Methyltrioxorhenium (MTO) in tandem with in-situ produced H2O2 in a Microbial Electrochemical Cell (MEC). This study demonstrates the in-situ oxidation of Kraft lignin using different concentrations of MTO catalyst (2 mM to 8 mM) and H2O2 (5.24 ± 0.40 mM to 8.91 ± 0.70 mM) in three MECs. The depolymerized Kraft lignin samples were characterized using FTIR, CHNS/O, and 1H NMR analysis. The MTO/H2O2 combination showed high selectivity towards the oxidation of Kraft lignin, resulting in both aromatic ring and side chain cleavage reactions and the production of valuable feedstock chemicals. The oxidation also led to a reduction of 68.42 % to 78.18 % in Chemical Oxygen Demand (COD) of lignin. The selective oxidation favored the recovery of Guaiacyl (G) unit-derived feedstock chemicals, with Guaiacol being the most abundant compound (45.04 mg/mL) among the quantified products by HPLC. Additionally, the system demonstrated high efficiency in anodic wastewater treatment, achieving BOD and COD removal rates ranging from 67.68 % to 72.55 %. This method showcases the use of a sustainable system in combination with a selective catalyst to produce valuable products from usually discarded Kraft lignin while simultaneously treating wastewater.