Abstract
A hydrometallurgical treatment based on leaching and oxidation of trivalent antimony in hydroquinone-catalyzed alkaline electrolyte and precipitation of sodium hydroxyantimonate was elucidated. The influences of temperature and hydroquinone concentration on both the leaching and oxidation processes were discussed. Similar trends for recovery curves of antimony were obtained at different temperatures and hydroquinone concentrations in oxygen-rich alkaline electrolyte. The antimony recovery was calculated to be 90% within 1h at 80°C in 0.4g⋅L−1 HQ. The complete trivalent to pentavalent antimony oxidation was achieved within 4h under optimum conditions in a single-stage process. The oxidation rate equation is as follows:rSbIII=−dCSbIIIdt=5.09.CSbIII1.02.CHQ1.05The precipitation product was found to be sodium hydroxyantimonate (mopungite) with pseudo-cubic crystal morphology. It is concluded that O2 was unlikely to be the most powerful oxidant, but rather the HQ is responsible for the rapid oxidation of Sb (III) by the formation of H2O2. The leaching and oxidation reaction mechanism for the formation of pentavalent antimony was proposed, resulting in intermediate species such as SbS33−, SbO2− and Sb2O3.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.