Catalytic performance of Cu/Hβ catalysts for selective catalytic reduction of NO with NH3

Abstract

A series of Cu(x)/Hβ catalysts were prepared by the impregnation method and the effect on the performance of the catalysts for the selective catalytic reduction of NO with NH3 (NH3-SCR) was investigated. Characterization techniques such as XRD, N2 adsorption-desorption, NH3-TPD, NO-TPD, H2-TPR, EDS and XPS were used to investigate the physical and chemical properties of the catalysts and the reason of the decrease of catalyst activity in the presence of SO2. It was shown that the catalyst Cu(3)/Hβ, the Cu loading was 3% and Cu(2)/Hβ, the Cu loading was 2%, exhibited the better catalytic activity when the initial reaction material contained no SO2 and SO2, and t95 was 169 and 225 °C, respectively. The analysis results of the catalyst before and after the reaction showed that the main reason for the decrease of catalyst activity in the presence of SO2 was that the ammonium sulfur salt which was formed by the reaction of SO2 and NH3 in the low reaction temperature covers the catalyst active center.