Catalytic oxidation and deionization of nitrite and nitrate ions using mesoporous carbon-supported nano-flaky cobalt and nickel oxyhydroxides

Abstract

The composite electrode of NiCo oxide supported by porous carbon was synthesized for nitrite oxidation and nitrate electro-sorption. The crystal structure and chemical state of the Co and Ni oxyhydroxides which were precipitated on loofah-derived activated carbon (AC) using hypochlorite were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and BET surface area. The voltammetry showed that the redox couple of Co(II)/Co(III) and Ni(II)/Ni(III) as the mediator catalytically transferred the electrons of NO2–/NO3–; the Ni site had a relatively high transfer coefficient and diffusive current, while the Co site was better in the capacitive removal of the nitrite and nitrate compounds. A batch electrolysis of nitrite ions was operated under constant anodic potential mode (0 to + 1.5 V vs. Ag/AgCl) to assess the performance of the composite electrodes. The adsorption capacity of NiCo/AC (Ni = 5% and Co = 5% on AC by weight) was 23.5 mg-N g−1, which was twice that of AC substrate (7.5 mg-N g−1), based on a multilayer adsorption model. The steady-state kinetics of the consecutive reaction were derived to determine the rate steps of the electrochemical oxidation of NO2– and adsorption of NO3–.