Abstract
AbstractThree types of screen‐printable catalytic pastes were successfully prepared to be used as counterelectrode for monolithic dye solar cells encapsulated with glass frit. The electroless bottom‐up method or so‐called polyol process has been applied to fabricate thermally stable SnO2:Sb/Pt and carbon black/Pt nanocomposites. The catalytic and electric properties of these materials were compared with a new platinum‐free type of carbon counterelectrode. The layers containing low platinum amounts (less than 5 µg/cm2) exhibit a very low charge transfer resistance of about 0·4 Ω · cm2. Also the conductive carbon layer shows an acceptable charge transfer resistance of 1·6 Ω · cm2. Additionally the catalytic layer containing porous carbon black reveals excellent sheet resistance below 5 Ω/□; this feature has enabled to work out a low cost counterelectrode which combined suitable catalytic and conductive properties. The layers have been characterized using following methods: electrochemical impedance spectroscopy (EIS), field emission scanning electron microscopy (FE‐SEM), energy filter transmission electron microscopy (EF‐TEM) and inductively coupled plasma mass spectroscopy (ICP‐MS). Copyright © 2008 John Wiley & Sons, Ltd.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Progress in Photovoltaics: Research and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.