Catalytic hydrothermal treatment of pulping effluent using a mixture of Cu and Mn metals supported on activated carbon as catalyst.

Abstract

The present study was performed to investigate the performance of activated carbon-supported copper and manganese base catalyst for catalytic wet oxidation (CWO) of pulping effluent. CWO reaction was performed in a high pressure reactor (capacity = 0.7l) at temperatures ranging from 120 to 190°C and oxygen partial pressures of 0.5 to 0.9MPa with the catalyst concentration of 3g/l for 3h duration. With Cu/Mn/AC catalyst at 190°C temperature and 0.9MPa oxygen partial pressures, the maximum chemical oxygen demand (COD), total organic carbon (TOC), lignin, and color removals of 73, 71, 86, and 85%, respectively, were achieved compared to only 52, 51, 53, and 54% removals during the non-catalytic process. Biodegradability (in terms of 5-day biochemical oxygen demand (BOD5) to COD ratio) of the pulping effluent was improved to 0.38 from an initial value of 0.16 after the catalytic reaction. The adsorbed carbonaceous fraction on the used catalyst was also determined which contributed meager TOC reduction of 3-4%. The leaching test showed dissolution of the metals (i.e., Cu and Mn) from the catalysts in the wastewater during CWO reaction at 190°C temperature and 0.9MPa oxygen partial pressures. In the future, the investigations should focus on the catalyst reusability.