Catalytic fast pyrolysis of walnut shell for alkylphenols production with nitrogen-doped activated carbon catalyst

Abstract

Alkylphenols are a group of valuable phenolic compounds that can be derived from lignocellulosic biomass. In this study, three activated carbons (ACs) were prepared for catalytic fast pyrolysis (CFP) of walnut shell to produce alkylphenols, including nitrogen-doped walnut shell-derived activated carbon (N/WSAC), nitrogen-doped rice husk-derived activated carbon (N/RHAC) and walnut shell-derived activated carbon (WSAC). Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were carried out to reveal the influences of AC type, pyrolytic temperature, and AC-to-walnut shell (AC-to-WS) ratio on the product distributions. Results showed that with nitrogen doping, the N/WSAC possessed stronger capability than WSAC toward the alkylphenols production, and moreover, the N/WSAC also exhibited better effects than N/RHAC to prepare alkylphenols. Under the catalysis of N/WSAC, yields of alkylphenols were significantly increased, especially phenol, cresol and 4-ethylphenol. As the increase of pyrolytic temperature, the alkylphenols yield first increased and then decreased, while high selectivity could be obtained at low pyrolytic temperatures. Such a trend was also observed as the AC-to-WS ratio continuously increased. The alkylphenols production achieved a maximal yield of 44.19 mg/g with the corresponding selectivity of 34.7% at the pyrolytic temperature of400°C and AC-to-WS ratio of 3, compared with those of only 4.67 mg/g and 6.1% without catalyst. In addition, the possible formation mechanism of alkylphenols was also proposed with the catalysis of N/WSAC.