Catalytic effects of borax and iron(III) chloride on supercritical liquefaction of Anchusa azurea with methanol and isopropanol

Abstract

ABSTRACTAnchusa azurea is a lignocellulosic gramineous plant, and it has been selected as a renewable feedstock to be used in a liquefaction process to obtain biofuel. Milled Anchusa azurea stalks were converted to liquid products in methanol and isopropanol with (borax or iron(III) chloride) and without catalyst in an autoclave at temperatures of 260, 280, and 300°C. The liquefaction parameter effects such as catalyst, solvents, and temperature were investigated. The highest percentages of liquid yields from methanol and isopropanol conversions were 64.70% (with borax) and 29.20% (with borax) at 300°C in the catalytic runs, respectively. The highest conversion (73.80%) was obtained in methanol with borax catalyst at the same temperature. The obtained liquid products at 300°C were analyzed and characterized by elemental, Fourier transform infrared spectroscopy and gas chromatography–mass spectrometry (GC-MS). Seventy-three different compounds have been identified by GC-MS in the liquid products obtained in methanol at 300°C.