Abstract

The purpose of this work is to report the results of an experimental study devoted to investigate the effects of SO2 in feed gas on the catalytic combustion of low-concentration coal bed methane (1 vol%) over CuO/γ-Al2O3 catalyst with 10 wt% Cu prepared by incipient wetness impregnation in a fix-bed reactor. The study deals with researching a regular low-concentration coal bed methane combustion with lean SO2, which is vital in utilizing low-concentration coal bed methane and in eliminating greenhouse emissions. The concentration of SO2 varied from 0 ppm to 200 ppm, and the accumulation of sulfur on the catalyst surface was examined by X-ray fluorescence (XRF) and Scanning electron microscopy (SEM). The reaction temperature was in the range of 450–700 °C controlled by an electric heater, and at two key reaction temperatures (550 °C and 650 °C), the effect of altering SO2 concentration on low-concentration coal bed methane combustion was studied experimentally. A sulfur poisoning mechanism of CuO/γ-Al2O3 catalyst was proposed. The results showed that the presence of SO2 in feed gas led to the phenomena of sulfur poisoning over CuO/γ-Al2O3 catalyst, and the effect of sulfur poisoning aggravated with increased SO2 concentration. Meanwhile, it had significant influence when temperature was below 575 °C due to the faster decomposition of sulfates at higher temperatures. A high reaction temperature promoted the decomposition of sulfates produced simultaneously, which provided more activating sites on the catalyst for methane catalytic combustion. Sulfates (CuSO4 and Al2(SO4)3) were detected by Fourier transform-infrared spectroscopy (FT-IR) and X-ray diffraction (XRD), resulting in both the reduction of activating sites and specific surface area of the catalyst. The absorption of methane molecules on activated sites was hindered and the catalyst activity decreased.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.